TV JONES BRIAN SETZER UNIV. MT GOLD BRIDGE

TV JONES BRIAN SETZER UNIV. MT GOLD BRIDGE

Disponibile

170,00 € Tasse incluse

Riferimento TVBSUMGB

Descrizione
Dettagli del prodotto

UNIVERSAL MOUNT: sostituisce English Mount e No Ear Mount

TV Jones presenta il suo primo pick-up firmato: il TV Jones Brian Setzer Signature, direttamente ispirato alla nostra lines di pick-up TV Classic. Chiarezza di tono e spinta sui bassi.

Bridge: Two specially wound bobbins with the TV Jones signature pole spacing
DC Resistance: 6.3K Inductance: 2.35H

Neck: Two specially wound bobbins with stock pole spacing
DC Resistance: 4.5K Inductance: 1.70H

Note: Shipped with 4 conductor wiring – ready for standard 2 conductor hook-up. Red and green wires are soldered and taped off for standard wiring

Tone/Characteristic:
Features a proprietary design. More clarity while producing the punchiest low-end mid response in our Classic line.

SPECIAL NOTES:

*Gretsch 5120/5122 Guitars: Ring risers are NECESSARY under the rings for this guitar due to it's high neck angle. The bridge position requires two and the neck requires one.

*Gretsch Pro Jet: Please specify "Short Bridge Cover" for the bridge pickup in the "Special Request" field. Routing may be necessary.

Special Considerations

Filter'Tron Replacement: The Universal Mount is a direct drop-in replacement for Vintage Filter'trons, HS Filter'trons, Fideli'trons, Mega'trons, Full-trons and any other standard sized 'Trons.

Blacktop Filter'Tron Replacement: You will need the Universal Mount and one Dual Screw Mount Adapter per pickup to mount into the stock rings.

Broad'Tron Replacement: You will need the Universal Mount along with a new EM2 Ring or EM5 Ring.

Gretsch-Bucker Replacement: You will need the Universal Mount along with a new EM2 Ring or EM5 Ring.

Post-2012 Electromatics: You will need the Universal Mount with one Dual Screw Mount Adapter per pickup. This is necessary to mount the pickup into your stock ring.

Streamliners: These guitars are made with "Gibson-style" rings instead of standard Gretsch rings. You will want to choose the Universal Mount with either our EM1 Ring, EM2 Ring, or EM5 Ring to replace the stock ring when installing a Universal Mount Pickup (this depends on which style you prefer). If you choose either the EM2 or EM5 Gretsch-style Rings you will also want a pack of Ring Risers (due to the neck angle).

Gretsch 5120/5122: You will need the Universal Mount along with an EM2 Ring or EM5 Ring and Ring Risers. Risers are recommended because the neck angle on these guitars tend to be high. You can find those in our Hardware section.

Gretsch 5420/5422 - early models: You will need the Universal Mount. If your guitar came stock with the large metal rings you will not be able to replace them with the smaller Gretsch rings because the footprint is too large. You will need one of our Dual Screw Mount Adapters for each pickup to attach the pickup to your stock ring.

Humbucker Replacement: To replace standard Humbuckers you will need the Universal Mount with one of our EM1 (Gibson-style), EM2 (Gretsch), EM5 (Gretsch), or EM4 (Fender-style) rings.