TWO NOTES TORPEDO C.A.B. M+
DisponibileTorpedo C.A.B. M+ is a powerful pedal platform providing the ideal foundation to build incredible tones without your amps or cabinets. It offers a studio grade, amp-free rig loaded with 32 premium DynIR Virtual Cabinets, each coming with a choice of 12 room emulations and 8 mics. Building on the success of the acclaimed Torpedo C.A.B. M, the C.A.B. M+ includes a stunning clean preamp, refined power amps, enhancer, tuner, expanded reverbs and noise gate.
Shape your tone directly on the hardware or control your C.A.B. M+ via your computer with Torpedo Remote USB in a home / studio environment. For convenient tone tweaking on stage, you can also pair your Torpedo hardware with your phone (or tablet) via Wireless Torpedo Remote (iOS / Android).
No other pedal offers such universal control of the miking chain - with dual miking available on every cabinet you may never use a real mic again. With our unique Dynamic IR / Virtual Cabinet technology – each cabinet contains the equivalent of 160,000 static IRs.
The Torpedo C.A.B. M+ also comes with an all new selection of 32 premium DynIR Virtual Cabinets, including official cabinet captures from Celestion, Engl and Victory Amplification.
Input / Output
Amp/Inst/Line Input:
1/4″ Jack balanced (TRS)
In Level Switch*:
+12dB: Max level: 4 dBu, Impedance: 1 MOhms
0dB: Max level: 16 dBu, Impedance: 57 kOhms
-24dB: Max level: 40 dBu, Impedance: 47 kOhms
*Affects input sensitivity and impedance
Aux In:
1/8″ (3.5mm) TRS Jack
Speaker output*:
1/4″ Jack balanced (TS)
*Unprocessed, unbuffered, directly connected to Amp In
DI output:
XLR balanced
Max level: 10 dBu
Impedance: 300 Ohms
Line output:
1/4″ Jack balanced (TRS)
Max level: 10 dBu
Impedance: 300 Ohms
Headphones output:
1/8″ Mini-Jack (TRS)
USB connector:
USB 2.0 Micro-B
Memory card:
256Mb Micro-SD included
Up to 32Gb cards supported
Digital Audio
AD/DA Converters:
Studio-grade 24 bits / 96 kHz
Bandwidth (-1dB):
30 Hz – 19 kHz
Signal-to-noise ratio:
91 dB
Internal Processing:
32 bits floating-point
Latency:
2.2 ms (Line Input to Line Output)
Power
Power adapter:
DC Jack 2.1mm, negative center
Input voltage:
12V DC
Power consumption:
Approximately 2W
Current consumption:
200mA
Dimensions & weight
Width x Depth x Height*:
12.1cm x 10cm x 6cm – 4.8″ x 4″ x 2.4″
*Including connectors and knobs
Weight:
450 g / 0.99 lbs