BRIDGE PICKUP - (IN SERIE)
I DUAL COIL HANNO 4 FILI, QUINDI SONO SPLITTABILI E COLLEGABILI IN SERIE O IN PARALLELO.
IL TIPO DI COLLEGAMENTO TRA PARENTESI RIGUARDA IL COLLEGAMENTO INTERNO TRA AVVOLGIMENTO SUPERIORE ED INFERIORE DI OGNI SINGOLA BOBINA, CHE NON E' MODIFICABILE
(IN SERIE) SUONO PIENO E CORPOSO
(IN PARALLELO) SUONO PIù SCAVATO SUI MEDI, INDICATO PER LO SLAP
This is a modern design dual coil humbucking pickup. Pickups like these are usually found on very high end basses. They use Alnico V magnets and the traditional bi-pole layout with two poles per string. It's almost like two Jazz Bass? stlye pickups in one cover.
These pickups are available in two different versions. One set is designed to be wired in parallel, and the other in series. The reason we do this is that a pickup that is made to sound good wired parallel will usually be too hot and dark sounding if wires in series. So, we put less wire on a series dual coil than a parallel dual coil.
In general, a pickup wired in series will have a fuller and fatter midrange with a subdued high end than a pickup wired in parallel, which will typically have more highs and a deeper low end with a cleaner midrange. Series pickups also have more output than parallel pickups. Parallel pickups are generally a better choice for a split-able installation, as there will not be the gain loss associated with series pickups.
These pickups are available only in black plastic covers with exposed pole pieces.
These pickups will fit as replacements for Bartolini? P2 (5 string) and BC (4 string) pickups. Dimensions are 4.25" by 1.25" and 3.95" by 1.25" respectively. Standard spacing is 19mm ctc at the bridge.
EMG35® (1.51″ x 3.52″) su richiesta via mail
|Pickup Basso||4 Corde|